, ,



DMC Exhaust Ships Free!





DMC Twin Exhaust for (06-14) Raptor 700. This true twin exhaust with independent high-flow stepped stainless steel headers for each exhaust port, Simply said, no merge collector! Header lengths are tuned to maximize exhaust scavenging and flow. This System delivers on its promise of horsepower and torque! After all that’s what it’s all about! The Raptor 700 DMC exhaust has been designed tested and track proven to blow away any aftermarket exhaust. Torque rolling in at a 31% increase and horsepower screaming across the finish line with a 24% increase. Installation on this monster is a snap. No need to bang, hammer, cut, saw, abuse or otherwise wrestle with parts or your Raptor. You can go from out of the box to out in front in a matter of minutes. This exhaust system works on all (06-14) Raptor 700 models.

  • Comp Exhaust System Performs Under 102db
  • Black anodized mufflers, red end caps, head pipes & heat shields
  • USFS Approved Spark Arrestors
  • 31% Increase in Torque
  • 24% Increase in Horsepower
  • 2.7 lbs. weight savings over stock

DMC Twin Exhaust Force 4 (06-14) Raptor 700. DMC has re-designed the Force-4 Twin to utilize a range of quick change Power Tune inserts. These Power Tune inserts are Reversion Cones? that can be easily changed in minutes to tune the exhaust system for your specific engine configuration or changing track conditions. In simple terms this allows you to alter where in the RPM range the power is maximized. Need increased horsepower output above the engines torque peak, no problem. Need increased horsepower output below the engines torque peak, no problem. DMC even offers Blank inserts so you can create your own custom design if necessary. The DMC FORCE-4 megaphone system produces maximum force (horsepower/torque) to accelerate your modified Raptor 700 harder than any other exhaust system on the market. Like the 2-stroke pulse chamber, scavenging is maximized with the twin megaphones, delivering maximum engine efficiency. The reverse cone of a megaphone times the negative wave pulse reflection to correspond with the period of valve overlap. This low pressure helps to pull in a fresh intake charge while the intake valve is opening. This low pressure also helps to remove the remaining exhaust gases before the exhaust valve closes. The DMC Force-4 is produced using 100% Stainless Steel headers and megaphone construction. Large diameter max-flow individual headers are easy to install and mount on each side of the Raptor with the entire system tucking neatly inside the frame rails. Extruded and hard-anodized twin aluminum mufflers sport stainless steel inlets and outlets and are easy to repack with high temp muffler-packing cartridges. Each system also includes black anodized alloy heat shields, precision laser cut Stainless Steel flanges, and USDA approved Spark arrestors.

Raptor 700 Exhaust Systems Ship Free!

DMC EFI Tuner is specifically mapped to work in conjunction with your DMC Twin Exhaust to deliver every ounce of torque and horsepower in a smooth and responsive power curve. It’s fully adjustable with three simple buttons on the faceplate to adjust the fuel curve richer or leaner in each area of the map. Advanced engineering eliminates the need for complicated computer programs or interfaces. Everything is controlled directly on the EFI Control Module.

The Power Commander 6 fuel injection tuning device allows you to optimize your fuel and timing curve (where applicable) giving you the confidence to roam freely.  With fine tune adjustability and multiple inputs, the Power Commander 6 will keep your vehicle running at its full potential letting you concentrate on the journey ahead.

Featuring a plug-and-play setup, Power Commander 6 can be installed discreetly underneath your seat, cowl, dash or other location ensuring your ride looks as good as it runs. Removing the device reverts your vehicle completely back to stock.  With the ability to store and switch between two maps on-the-fly  (via the map switch accessory) and connect to various Power Commander accessories such as the Autotune, Quick shifter or POD-300, the Power Commander 6 gives you features and functions that provide you with the ultimate ride.

  • Compact design for discrete placement & easy uninstallation to revert to stock settings
  • Easily change & upgrade tunes as you upgrade parts
  • Comes with Power Core software that connects dyno runs with our EFI Tuning Devices to unlock your ride’s potential
  • Pair with other Power Commander accessories like the Autotune, Quickshifter or POD-300
  • Analog input allows you to install any 0-5 volt sensor and build an adjustment table based on its input such as boost or temperature
  • Easily connects to your computer via USB
  • Each cylinder can be mapped individually and for each gear, giving riders more granular control
  • One year warranty
  • Proudly made in the USA
Weight 1 lbs
Shopping Cart